Built in an ABS plastic case, with lugs to be screwed to the underside of the counter, the STS-A31H amplifier provides two channels of full open duplex communication, with a loop drive compliance bounded by 4V RMS and 3V RMS. The gain on each channel can be adjusted independently with volume controls. All connections are via two pin plugs. Microphone cable is screened, loudspeaker and induction loop are twin wires. Dimensions (HxWxD): 116 x 115 x 40mm. Weight: 100g. Power supply: PS-55-01-UK, 12-14VDC.
This breakout box has been designed to enable the use of headsets in place of the staff microphone/loudspeaker. This gives for a quieter environment in places such as ticket booths, service points or where multiple vendors are nearby. A push button allows for muting. STS-SJB-RJ has a single RJ11 connection for both headphone and microphone. Connection to STS-A31H amplifier is via 2-pin removable terminal-block connector ('Euroblock'). Dimensions (HxWxD): 20 x 117.6 x 39mm. Weight: 100g.
STS-S60 - Loudspeaker, Surface Mount
Available in black or grey versions, STS-S60 is a 5watt surface mount loudspeaker designed for Contacta speech transfer systems. Normally found in banks, post offices, ticket kiosks, and information centres, this loudspeaker is a useful addition to any speech transfer system where a screen is involved. The loudspeaker is rated at 5W RMS with an SPL output of 1W at 1m 85dB, and a frequency response of 150Hz to 10.3kHz. Dimensions (HxWxD): 75 x 60 x 110mm. Weight: 550g.
STS-S61 - Loudspeaker, Flush Mount
A customer facing, flush mount loudspeaker that has been designed to be mounted into a surface for a 'sleek look'. The loudspeaker is available in grey or black finish and has an RMS output of 5W and an impedance of 4ohms. The frequency response is 150Hz to 10.3kHz with an sound pressure level of 85dB, 1W at 1m. Dimensions (HxWxD): 50x65x120mm. Weight: 413g
STS-SU1 - Combined microphone and loudspeaker
This free-standing unit is available in grey, black or stainless steel. It is for use on the staff side of the security screen and offers a mute switch for convenience. The cardioid microphone capsule with a frequency response of 150Hz – 10.5kHz and a sensitivity of 49.5dB (at 1kHz), is positioned at the upper end of a semi-rigid stem with adjustable neck. The loudspeaker is rated at 5W RMS with an SPL output of 1W at 1m 85dB. Dimensions (HxWxD): 370 x 95 x 150mm. Weight: 820g.
STS-SU1-3W - Combined microphone and loudspeaker with dual mute switch
A free-standing unit that has been designed for use on the staff side of the security screen and offers a dual mute switch for convenience. The dual muting allows the member of staff to allow sound from both sides of the counter, muted staff microphone, or muted staff and customer microphones. The cardioid microphone capsule with a frequency response of 150Hz – 10.3kHz and a sensitivity of 49.5dB (at 1kHz), is positioned at the upper end of a semi-rigid stem with adjustable neck. The loudspeaker is rated at 5W RMS with an SPL output of 1W at 1m 85dB. Dimensions (HxWxD): 370 x 95 x 150mm. Weight: 820g.
STS-M54 - Microphone, Surface Mount
Available in black or grey versions, STS-M54 is a 5watt surface mount omnidirectional microphone designed for Contacta speech transfer systems. Normally found in banks, post offices, ticket kiosks, and information centres, this microphone is a useful addition to any speech transfer system where a screen is involved. The microphone is has a frequency response of 100Hz to 5kHz. Dimensions (HxWxD): 75 x 60 x 110mm. Weight: 550g.
STS-M56 - Microphone, Flush Mount
A customer facing, flush mount microphone with an omnidirectional pickup pattern. The microphone has been designed to be mounted into a surface for a 'sleek look'. STS-M56 is available in grey or black finish and frequency response of 100Hz to 5kHz. Dimensions (HxWxD): 50 x 65 x 5mm. Weight: 164g
STAFFMIC-01-NWB - Microphone, Freestanding
STAFFMIC-01-NWB is manufactured in mild steel for durability. A 300mm flexible gooseneck is attached to a round base with a diameter of 70mm to give a total height of 340mm and weight of 950g. The microphone has a cardioid pick-up pattern, a frequency response of 150Hz - 10.5kHz and a sensitivity of 49.5dB at 1kHz.
STS-M14 Microphone, Anti-vandal
Available in three lengths - 120mm (STS-M14-120), 200mm (STS-M14-200), or 300mm (STS-M14-300); STS-M14 is a straight stemmed unidirectional microphone designed for use with compatible Contacta speech transfer system. The microphones has a frequency response of 100Hz to 5kHz, with a distortion level of less than 1percent. Construction material is aluminium with silver anodised finish. Dimensions (Diam x L); 30 x 120/200/300mm. Weight: 0.4/0.45/0.5kg.
IL-RX20 - Loop Listener
The IL-RX20 Loop Listener is a compact listening device designed for use and interaction with hearing loop systems whereby an engineer can listen to the hearing loop system as though they were wearing a compatible hearing aid switched to the 'T' position. The two included alkaline AAA batteries will give more than 100 hours life; a rotary volume control doubles as on/off switch. An LED illuminates to signify power on. The included headphones are connected via 3.5mm jack socket located on the top of the IL-RX20. Dimensions (HxWxD): 240 x 165 x 40mm. Weight: 550g, with headphones.