UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

14 February 2025

MUXLAB 500436 HDMI TO HDMI With audio extraction, 4K/60

Stock code
28-7045
Brand
Muxlab
Model number
  • 500436
MUXLAB 500436 HDMI TO HDMI With audio extraction, 4K/60
MUXLAB 500436 HDMI TO HDMI With audio extraction, 4K/60MUXLAB 500436 HDMI TO HDMI With audio extraction, 4K/60

MUXLAB AUDIO AND VIDEO ADAPTERS - Over Cat5e

Used in pairs, these useful devices (usually known as baluns in the data world) allow the transmission of audio and video signals on existing UTP and FTP structured wiring systems, either as part of a permanent installation or for a temporary rig, possibly avoiding the need for special cable runs.

All of this series are passive devices and are housed in compact plastic boxes. The Cat5 connection is normally an RJ45 socket, a few units have screw terminal connections.

Unless stated as being a 2-pack, all types are priced and sold SINGLY. These units must be used in pairs with one device at each end of the cabling.

AUDIO

VIDEO

AUDIO/VIDEO


500039 Stereo Hi-Fi and video, 3x male RCA

Discontinued

Allows one composite video plus one full-bandwidth stereo audio to be transmitted over Cat5E cable. Connections are RCA (phono) plugs on short tails. Audio bandwidth 20Hz-20kHz, -3dB. Maximum transmission distance 675 metres.


500436 HDMI to HDMI with audio extraction, 4K/60

This unit allows the user to distribute a single HDMI source to a single HDMI destination whilst extracting the audio in LPCM, Dolby Digital, DTS, compressed Dolby Digital Plus, and compressed Atmos formats. Supporting HDCP 2.2, 4K/60, and 8-bit colour depth, 500436 is a useful tool to employ in commercial AV systems, classroom projection systems, digital signage, and collaborative PC systems.

Dimensions (WxDxH): 72 x 60 x 25mm. Weight: 0.33kg.


500439 HDMI audio extractor, dual RCA

Designed for use in digital signage, medical information services, classroom projection systems, and commercial AV systems, 500439 allows the audio extraction from a video source whilst looping out, and therefore extending, the HDMI source to a local display. Supporting HDMI up to 4K/60, and HDCP 1.4 and 2.2, this audio extractor down-mixes Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD, or LPCM up to 7.1 channel to 2-channel analogue audio, and outputs it via dual RCA (phono) connections.

Dimensions (WxDxH): 117 x 76 x 32mm. Weight: 0.45kg


500600 Infrared Extender Kit

Designed for residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems, or commercial display on/off control, Muxlab 500600 is an infrared remote extender that allows up to four audio/video sources to be controlled via remote IR up to 670m away from the display. The control takes place over Cat5e/6 cable.

500600 includes 1x 500999 infrared sensors and 4x 500998 infrared emitters. Also included are hook and loop pads for mounting, and three pairs of screw terminal blocks allowing the three unused twisted pairs to be accessed for other low voltage services such as balanced video, audio or data.

Dimensions (WxDxH): 61 x 57 x 25mm, transmitter; 61 x 57 x 25mm, receiver. Weight: 0.6kg

Ordering note:

Unless stated as being a 2-pack, all types are priced and sold SINGLY. These units must be used in pairs with one device at each end of the cabling.