Intended for general purpose applications, these ‘universal’ speakers have a compact design, are manufactured from resin, and are designed to be mounted onto a wall within hotels, restaurants, conferencing, and retail environments.
BS-633A and BS-633AT have the same design and audio properties however BS-633AT has a built-in attenuation control that is switchable in four positions.
The ABS resin manufactured speaker is designed to be hooked or mounted directly onto the wall, making installation quick and relatively easy. The single 12cm cone offers frequencies of 120Hz to 15kHz whilst operating at 70V or 100V line level. Connection is via push-in terminal connector.
Included accessories: 4x mounting screws.
Rated power: 6W, 100V; 3W, 70V. Power selection: 6/3/1W, 100V; 3/1.5/0.5W, 70V. Frequency response: 120-15000Hz. Sensitivity: 91dB SPL, 1W, 1 metre. Environment: -10 to +50 degrees Celsius. Dimensions (WxHxD): 173 x 195 x 101mm. Weight: 0.78kg
BS-634 and BS-634T have the same design and audio properties however BS-634T has a built-in attenuation control that is switchable in four positions.
These fire resistant (‘according to UL 94-V0’) loudspeakers have been designed for wall mounting via the included speaker receptacle which is in turn secured using included screws. Wiring should be directly to the speaker receptacle via screw terminals, to which the loudspeaker is attached. The 12cm cone provides frequency response of 120Hz to 18kHz.
Included accessories: 1x speaker receptacle, 2x wall mounting screws.
Rated power: 6W. Power selection: 6/3W, 100V; 3/1.5W, 70V. Frequency response: 120-18000Hz. Sensitivity: 90dB SPL, 1W, 1 metre. Dimensions (WxHxD): 210 x 330 x 80mm. Weight: 1.3kg
Available in off-white (RAL 9010) or black (RAL 9011), BS-1030 is a speaker designed with ‘keyhole’ slots to facilitate direct fixing to a wall, or mounted in a number of angles using the included yoke. The 2-way (12cm woofer and 2.5cm horn) loudspeaker is fitted with line transformer, and may be switched to off, low impedance, 70V or 100V line, with a variety of power ratings at 100V or 70V line. Connection is a captive lead, 600mm. IP-X4 ‘splash-proof’ construction permits them to be installed outdoors under eaves and in other locations where the speaker is not directly exposed to the elements, provided that the speaker grill is vertical, or pointing downwards. Drivers are 120mm cone and 25mm dome.
Included accessories: 1x yoke mounting bracket, 2x mounting screws, 2x washers.
Rated power: 30W. Power selection: 30W, 8ohms; 30/20/15/10/5W, 70V/100V line. Frequency response: 80-20000Hz. Sensitivity: 90dB SPL, 1W, 1 metre. Environment: -10 to +50 degrees Celsius. IP rating: IP-X4 (when the angle of the installed speaker is vertical or horizontal). Dimensions (WxHxD): 196 x 290 x 150mm. Weight: 2.5kg
A series of paintable loudspeakers designed for wall or ceiling mounting. The speakers have a wide 100x100 degree dispersion and can be adapter to a tighter 80x80 degree dispersion by utilising the included horn adapter. The 20cm woofer and 2.5cm HF driver produce a frequency response of 65Hz to 20kHz with a sensitivity of 92dB, or 93dB with applied horn adapter. Connection is via clamp terminal on the rear panel of the speaker housing, and mounting can be via included bracket or optional HY-CM20B/HY-CM20W wall or ceiling bracket. Four F-2000 series speakers can be mount in a cluster formation by utilising the optional HY-CL20B cluster bracket.
F-2000B and F-2000W operate on low impedance systems at 8ohms. F-2000BT and F-2000WT can operate on either low impedance systems at 8ohms, or on 70/100V line. F-2000BTWP and F-2000WTWP have weatherproof properties of IPX4 standard. These two models only operate on 70/100V line.
Included accessories: 1x speaker bracket, 1x joint bracket, 1x wall bracket, 1x bracket fixing set, 1x horn adapter, 4x horn adapter mounting screws. All models except F-2000B and F-2000W also include 1x terminal cover and 4x terminal cover screws.
Rated power: 60W, continuous pink noise; 180W, continuous program. Power selection: 8ohms, applicable models; 60/30/15/3W, 100V line, applicable models; 60/30/15/7.5/1.5W, 70V, applicable models. Frequency response: 65-20000Hz. Crossover frequency: 2500Hz. Sensitivity: 92dB SPL, 1W, 1 metre. Environment: -10 to +50 degrees Celsius. IP rating: IPX4 (‘WP’ models only - when the angle of the installed speaker is vertical or horizontal). Dimensions (WxHxD): 244 x 373 x 235mm. Weight: 6.5kg, F-2000B/W; 7.4kg, other models.