UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

11 December 2024

SIGNET PRO5/DD INDUCTION LOOP AMPLIFIER Phase-shifting, desktop, for areas up to 200m2

Stock code
93-8231
Brand
Signet
Model number
  • PRO5/DD
  • PRO5
SIGNET PRO5/DD INDUCTION LOOP AMPLIFIER Phase-shifting, desktop, for areas up to 200m2
SIGNET PRO5/DD INDUCTION LOOP AMPLIFIER Phase-shifting, desktop, for areas up to 200m2SIGNET PRO5/DD INDUCTION LOOP AMPLIFIER Phase-shifting, desktop, for areas up to 200m2SIGNET PRO5/DD INDUCTION LOOP AMPLIFIER Phase-shifting, desktop, for areas up to 200m2

Order

VAT / Delivery
$853.76
each (ex. VAT)
Ordered on demand, available in 3‑5 working days. Need it sooner? Call us

SIGNET AFILS LOOP AMPLIFIER SYSTEMS - Phase shifting, desktop

Signet’s PDA and PRO series of phase-shifting induction loop amplifiers have been designed and manufactured in the UK to suit areas up to 1000 square metres such as meeting rooms, offices, churches, classrooms, or theatres. This series of AFILS loop amplifiers are also available as wallmount amplifiers, see SIGNET AFILS LOOP AMPLIFIER SYSTEMS - Phase shifting, wallmount


PDA5/DD, PDA7/DD, PDA11/DD - LED interface

PDA5, PDA7, and PDA11 constant current amplifiers feature phase-shifting technology to give consistent coverage with low chance of dead spots, and minimal overspill. An LED interface along with four membrane control buttons aids navigation and easy setup, whilst also giving clear indication of operation and fault status.

Model coverage
PDA5/DD 2x 3.25 Amp 200m2 (approx. 14 x 14m)
PDA7/DD 2x 5 Amp 500m2 (approx. 22 x 22m)
PDA11/DD 2x 7.5 Amp 1000m2 (approx. 31 x 31m)

All models have the same front panel functionality, and rear panel connectivity including 2x selectable mic/line inputs on 3-pin XLR, 1x outreach input via 4-way Phoenix connector for connection to up to ten compatible outreach plates, see SIGNET AFILS LOOP AMPLIFIER SYSTEMS - Accessories - Outreach Plates; loop output on 4-way binding posts, and line output on 3-way Phoenix connector. There is also a 3-way Phoenix connector for fault relay, and a single mains IEC connector is also positioned on the rear panel.

Input sensitivity: -20dBU typical, line; -42dBU typical, mic. Outreach input sensitivity: 0dBU. Outreach input impedance: >10k. Outreach power: 24V DC, 100mA max. Loop output voltage: 14V. Line output: 775mV. Metal compensation: up to 10dB. Frequency response: 100Hz – 5kHz, -3dB. Distortion: Less than 1%. Signal to noise: Better than -65dB. AGC range: 10dB, 3dB change in output voltage current. AGC ratio: 20:1. IP rating: IP40. Dimensions (HxWxD): 67 x 218 x 280mm. Weight: 2.38kg.


PRO5/DD, PRO7/DD, PRO11/DD - OLED display

PRO5, PRO7, and PRO11 have the same functionality as the PDA5, PDA7, and PDA11 amplifiers above, however in place of the LED interface is an OLED display giving more in-depth information, ease of setup, and fault and diagnostics feedback. PRO/DD models also include a ‘Toslink’ optical input for connection to devices such as TV or sound bar.

Model coverage
PRO5/DD 2x 3.25 Amp 200m2 (approx. 14 x 14m)
PRO7/DD 2x 5 Amp 500m2 (approx. 22 x 22m)
PRO11/DD 2x 7.5 Amp 1000m2 (approx. 31 x 31m)