This handy range of tool pouches, gaffer holders, glove clips, tool belts and lanyards has been designed to aid with some of the annoyances of general rigging. You will never find yourself grabbing thin air for that elusive screwdriver, tape measure or your Dirty Rigger gloves again.
Technicians Tool Pouch, 11 pockets, 4 D-ring attachments & 1 tape measure holder
Designed for use by riggers and technicians alike this durable tool pouch is made from durable polyester, featuring eleven inner and outer pockets, ideal for screwdrivers, spanners, hammers, tape measures and much more. The five inner pockets are all secured with a hook and loop flap over the top of the pouch. Four D-ring attachments are included for easy linking of accessories and a long-handle screwdriver opening is located on the side pocket. The pouch also includes a tape measure holder, suitable for holding a standard retractable tape-measure of up to 10m.
Dimensions: 150 × 100 × 190 (w × d × h)mm.
Riggers Tool Pouch, 6 pockets & 3 D-ring attachments
A slimline tool pouch, with six inner pockets secured with a full-width, draw-string, netting and hook and loop closure flap. Made using the same durable polyester as the technicians tool pouch. Three D-ring attachments for easy linking of accessories and a long-handle screwdriver opening on left side pocket.
Dimensions - 210 × 220 × 80 (h × w × d)mm.
Compact Utility Pouch, with magnetic-closure flap
The compact size of this tool pouch makes it ideal for smaller screwdrivers, phones, pens and a variety of other tools; elasticated pockets add to its versatility. The pouch is secured with a high-strength magnetic-closure flap.
Dimension: 140 × 95 × 50 (h × w × d)mm..
Gaffer Holder with carabiner clip
With a secure carabiner clip for instant attachment and release, combined with a fully-adjustable buckle for varying the drop-length and tightness. The lower section has an easily accessible strap for holding gaffer tape, tools, clamps and bags.
Glove Guard, with break-away system
Designed to allow easy access and storage of gloves this has a patented safety (5kg/7lbs) break-away system, to help prevent injuries from snagging during high-level rigging.
Tool Belt, single-handed release
Constructed from a multi-layered material that is breathable and padded to allow excellent ventilation. A heavy-duty, 50mm, belt buckle keeps the tool-belt secured around the waist and can be removed single-handedly when required. The belt is compatible with the full range of Dirty Rigger pouches and accessories.
Adjustable to fit waist: 28 - 40 inches.
Tool Lanyards - Double Carabiner
Heavy-duty, elasticated, 1metre cord with reflective nylon covering, light-weight carabiner clips at either end, maximum working capacity 10lbs or 4.8kg. The lanyard is not suitable for climbing or fall-arrest.
Tool Lanyards - Single Carabiner
As the double carabiner, however the end clip has been replaced by an adjustable and detachable elastic loop. Removable loops can be pre attached to tools for easy on/off access. Packs of extra loops can be bought separately. The single carabiner has a maximum working capacity 5lbs or 2.3kg. The lanyard is not suitable for climbing or fall arrest.
For Dirty Riggers range of rigging and work gloves see DIRTY RIGGER PROTECTIVE WORK GLOVES.
Technicians Backpack
Designed by technicians, for technicians. The Dirty Rigger backpack brings together 18 months of product development with industry specialists from around the world, to deliver what they say is 'the only backpack an industry professional will ever need'. Made from ultra-tough 600 denier outer fabric with heavy duty zips and anti-puncture, water resistant and abrasion resistant base. Featuring a main storage compartment (32 x 49 x 14cm), front pocket (27 x 32 x 3cm), laptop compartment (30 x 44 x 3cm) and 2x side pockets (15 x 22 x 4cm), as well as four d-rings for additional attachments. Unladen weight: 2.1kg.