UK Sales: 0191 418 1122 International: +44 191 418 1133
Red LED’s indicate presence of 48 volt phantom power on A and B legs. Fitted with XLR 3 pin male connector. LED’s also indicate presence of 12 volt phantom power by illuminating…
Lapel microphones used with radio-mic transmitter body-packs usually require a low-voltage bias that is normally provided by the pack. These useful adapters take the place of the…
A battery driven power supply capable of powering all common professional microphone powering standards. 12 volt AB(T) power, 12, 24 and 48 volt phantom (fully meeting…
In-line unit to adapt equipment with 48 volt phantom powering (eg. ENG mixers) to supply T-powered microphones. Phantom power end is XLR 3 pin male, T-power end is XLR 3 pin…
Battery and mains powered two-channel 48V microphone phantom power supplies, housed in a standard extruded box. Both models have panel-mounted XLR type input and output…
A range of 48 volt microphone phantom power supplies, comprising: E720 Single channel battery powered (1 ×PP3 size alkaline). Low battery indicator. Battery life…
The VT1126 phantom adapter is a small unit that allows hard-wired use of miniature lavalier microphones. It converts 48V phantom to electret power and puts out the audio as an…
These adaptors have been designed by AKG to compliment a range of AKG microphones. A useful addition to the sound engineers toolbox. MPA-VL This phantom power adaptor has been…
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
