A selection of products from Muxlab that have been designed to better allow the transfer of video over SDI.
500701 HD-SDI video
Each balun has a 75 ohm, male, BNC connector, attached to the cast aluminium casing, for connection to the SDI signal. An RJ45 socket is used to connect to a length of Cat5E/Cat6 cable. Up to 1.5 Gb/s uncompressed, un-encrypted digital video, (optionally including up to 16 channels of embedded audio and/or embedded time code), is supported.
Standards supported: SMPTE 259M (270Mb/s), SD(PAL, NTSC); SMPTE 292M (1.5 Gb/s), HD (720p, 1080i).
Maximum reach: Up to 100/120/150m using Cat5/Cat5E/Cat6 UTP for SD signals; up to 30/45/45 metres using Cat5/Cat5E/Cat6 UTP for HD signals.
Note that the maximum distance is a function of the receiving equipment equaliser and the noise present in the environment.
Available as 500701-2PK two pack.
Dimensions (LxHxW): 20 x 26 x 47mm, not including the BNC connector. Weight: 44g.
500742 12G-SDI repeater
500742 is a 12G-SDI to 12G-SDI repeater with amplification, re-clocking, and auto source video format detection. The repeater features one 12G-SDI video input, one 12G-SDI loop video output, a locking power supply connector, and a USB port for software control and firmware upgrade. An output LED shows the status of the phase locked loop (PLL) video signal locking.
SDI input video resolutions include 720x576i, 50fps at SD-SDI, up to 4096x2160p, 60/50fps at 12G-SDI. Supported audio: 16-channels, 24-bit, 48kHz. Distance (input/output): 100m/100m, 70m/50m, 12G-SDI; 100m/100m, 3G-SDI. Power supply:12V DC, with locking connector. Dimensions (LxHxW): 100 x 26 x 70mm.