UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

21 January 2025

GLENSOUND VIRGIL OB HEADPHONE AMPLIFIER Belt pack, analogue/Dante inputs, 6.35/3.5mm jack outputs

Stock code
95-9053
Brand
Glensound
Model number
  • VIRGIL OB
GLENSOUND VIRGIL OB HEADPHONE AMPLIFIER Belt pack, analogue/Dante inputs, 6.35/3.5mm jack outputs
GLENSOUND VIRGIL OB HEADPHONE AMPLIFIER Belt pack, analogue/Dante inputs, 6.35/3.5mm jack outputsGLENSOUND VIRGIL OB HEADPHONE AMPLIFIER Belt pack, analogue/Dante inputs, 6.35/3.5mm jack outputsGLENSOUND VIRGIL OB HEADPHONE AMPLIFIER Belt pack, analogue/Dante inputs, 6.35/3.5mm jack outputsGLENSOUND VIRGIL OB HEADPHONE AMPLIFIER Belt pack, analogue/Dante inputs, 6.35/3.5mm jack outputs

GLENSOUND HEADPHONE AMPLIFIERS

A range of headphone amplifiers with and without Dante audio input, from Glensound. Designed for use in studio or broadcast, this range includes headphone amplifiers can be portable, desk or permanently wall mounted.

VIRGIL Series - Dante

Ordering note: The standard versions of Virgil headphone amplifiers listed below feature a front panel pot range of -20 to +10dB. The same units can be ordered as a special order with a pot range of -70 to +10dB. Please contact our Sales team for more information.


Virgil - Install

Powered over PoE, Glensound Virgil studio headphone amplifier with Dante audio inputs is designed for permanent install into studio, production room, or stadium commentary box. Two audio channels can be received from a Dante network with one sent to the left and the other to the right channel of the headphone amplifier. A volume pot on the front facing panel allows the user to determine the audio level send to the headphones. As the volume pot allows adjustment from -20 to +10dB it’s worth noting the audio signals will never be turned completely off. Instead they can always be heard, at worst at low volume, so that important announcements aren’t missed. If the user wishes to have the volume turned off, a hardware soldering job can be done on the internal PCB. Otherwise a -70 to +10dB version can be purchased as a special order item.

The rear facing panel houses RJ45 network connection for Dante audio and PoE, and a dual purpose 5V USB socket that can be used to power the Virgil from a compatible USB power adapter, or upload new firmware if required.

The front facing panel of the headphone amplifier features the rotary volume controller, 6.35mm and 3.5mm headphone jack outputs, and ‘bright’ blue LED signifying power.

Headphone impedance: 32 – 1000ohms. Maximum output level: +15.8dB, into 600ohms. Front panel pot range: -20 to + 10dB, standard. Frequency response: greater than -0.1dB at 20Hz to 22kHz. Distortion: less than 0.008%, 1kHz. Noise: less than -73dB, 22Hz to 22kHz. Output power: 1w. Power consumption: 2 watts, maximum. Dante sample frequency: Up to 96kHz. Resolution: 24bit. Line up: 0dBu = -18dBFs. Dimensions (WxHxD): 86.61 x 32.23 x 104.31mm. Weight: 220g


Virgil BC - Portable

Glensound Virgil BC has the same feature set and specifications as Virgil, however it is designed to be portable and has a belt clip mounted to the underside. Three mounting holes are still provided should the user wish to mount under a desktop surface.

Headphone impedance: 32 – 1000ohms. Maximum output level: +15.8dB, into 600ohms. Front panel pot range: -20 to + 10dB, standard. Frequency response: greater than -0.1dB at 20Hz to 22kHz. Distortion: less than 0.008%, 1kHz. Noise: less than -73dB, 22Hz to 22kHz. Output power: 1w. Power consumption: 2 watts, maximum. Dante sample frequency: Up to 96kHz. Resolution: 24bit. Line up: 0dBu = -18dBFs. Dimensions (WxHxD): 86.61 x 32.23 x 104.31mm. Weight: 220g


Virgil OB - Robust housing

Virgil OB also has the same feature set as Virgil, however it is housed in a ‘robust but lightweight’ aluminium casing and belt clip for ‘life on the road’.

Virgil OB also includes two analogue link outputs on 3-pin XLR. These outputs can be switched from pre/post-fade of the front panel rotary volume controller.

Headphone impedance: 32 – 1000ohms. Maximum output level: +15.8dB, into 600ohms. Front panel pot range: -20 to + 10dB, standard. Headphone frequency response: greater than or equal to -0.1dB at 22Hz to 22kHz. Balanced output frequency response: greater than or equal to 22Hz to 22kHz at -0.1dB. Headphone noise: -74dB, lineup. Balanced output noise: -74dB, lineup. Output power: 1w. Power consumption: 2 watts, maximum. Digital line up: 0dBu = -18dBFs. Dante sample frequency: 48-96kHz. Dante resolution: 24bit. Dimensions (WxHxD): 42 x 101 x 103mm. Weight: 200g

GS-HA Series

SIGNATURE HA+ Series