UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

22 January 2025

GENELEC 4430A SMART IP LOUDSPEAKER Active, 2-way, 50/50W, Dante/AES67 compatible, white

Stock code
76-1213
Brand
Genelec
Model number
  • 4430A
  • 4430AWM
Colour
  • WhiteWhite

Order

VAT / Delivery
$1,165.10
each (ex. VAT)
Ordered on demand, available in 1‑2 working days. Need it sooner? Call us

GENELEC ACTIVE LOUDSPEAKERS - Installation

Genelec's 4000 and 4400 Smart IP series of installation loudspeakers bare resemblance to the ever popular 8000 series studio monitor range in both aesthetics and sound design. Designed specifically for indoor commercial and professional installations, 4000 series speakers are available in either white or black finishes, with some 4400 Smart IP series monitors also available in RAW aluminium or specified RAL finish. All models feature matched electronic-crossovers and individual amplifiers for each driver. All are compatible with a range of mounting hardware, see GENELEC LOUDSPEAKERS - Mounting Accessories

4000 Series

4400 Smart IP Series


4410A Smart IP

A bi-amplified, two-way loudspeaker with PoE and AoIP, designed for fixed indoor installation purposes. The loudspeaker houses a 76mm bass driver and 19mm treble driver, independent bass and treble 18W Class D amplifiers, and produces a frequency range of 67Ha to 40kHz.

4410A Smart IP loudspeakers only require a single CAT cable connection to enable both Power Over Ethernet (PoE), using PoE+ or PoE standards, and Audio Over IP (AoIP). Class D amplification is combined with Genelec’s Minimum Diffraction Enclosure (MDE) and Directivity Control Waveguide (DCW) to reduce acoustic diffractions and frequency balance. An active crossover, set to 2900Hz allows both low frequency and high frequency drivers to produce optimum performance.

4410A accepts AES67/ST2110 and Dante audio-over-IP streams. The streams are set up with Dante Controller or Dante Domain Manager software. Each 4410A supports reproduction of one or the sum of two audio input channels. The stream audio sample rate can range from 32-96 kHz, with 16-24-bit resolution. 4410A contains one rear panel CAT connector for standard Ethernet IP network connectivity with a network interface speed of 100 Mbps. The rear panel CAT connector also allows connectivity to Genelec’s Smart IP Manager software that is available for Windows 10 computers. The software allows AV installers to configure an almost unlimited number of rooms, zones, loudspeakers and audio channels, and includes device discovery, a versatile room acoustic equalisation tool set, system organisation and status monitoring. 4410A contains an application programming interface (API) supporting control via third-party hardware, software, or house automation. The API enables integration to all house and home automation systems.
Genelec suggest the loudspeaker be installed so that the minimum clearance for amplifier cooling and reflex port function around the loudspeaker is 3cm behind, above and on both sides of the loudspeaker. If the back side of the loudspeaker is blocked, it must be ventilated so that the ambient temperature remains below 35degrees C at any moment of operation.

The automatic power function ISS (Intelligent Signal Sensing) powers the loudspeaker automatically down when it is not in used and up when the use resumes. ISS can be activated and adjusted with the Smart IP Manager software. Powering down to standby happens after a set time when playback has ended with playback automatically resuming with an input signal exceeding the level configured using the Smart IP Manager.

Available finished: Black or white.
Included accessories: Keyhole-type wall bracket, mounting screw set.


4420A Smart IP

Genelec 4420A Smart IP loudspeaker has the same feature set as 4410A, however it has a greater frequency response of 55Hz to 39kHz, drivers measuring 105mm (low frequency) and 19mm (high frequency), with dual 50W Class D amplification. In addition to the RJ45 AES67/Dante input, 4420A also has a 3-pin Euroblock style connector for analogue audio input.

Available finishes: Black, white, raw aluminium, or RAL finishes. For available RAL colours, please see attached datasheet.
Included accessories: Keyhole-type wall bracket, mounting screw set, 3-pin Euroblock connector.


4430A Smart IP

Genelec 4430A Smart IP loudspeaker has the same feature set as 4410A, however it has a greater frequency response of 45Hz to 39kHz, drivers measuring 130mm (low frequency) and 19mm (high frequency), with dual 50W Class D amplification. In addition to the RJ45 AES67/Dante input, 4430A also has a 3-pin Euroblock style connector for analogue audio input.

Available finishes: Black, white, raw aluminium, or RAL finishes. For available RAL colours, please see attached datasheet.
Included accessories: Keyhole-type wall bracket, mounting screw set, 3-pin Euroblock connector.

4400 Smart IP Series Specifications
4410A 4420A 4430A
LF driver 76mm 105mm 130mm
HF driver 19mm 19mm 19mm
Frequency response, -6dB 67Hz - 40kHz 55Hz - 39kHz 45Hz - 39kHz
Frequency response 74Hz - 20kHz, +/-2.5dB 62Hz - 20kHz, +/-1.5dB 58Hz - 20kHz, +/-1.5dB
Lower cut-off frequency 67Hz 55Hz 45Hz - 39kHz
Upper cut-off frequency 40Hz 39kHz 39kHz
Crossover 2900Hz 3000Hz 2900Hz
RMS SPL,1m 91dB 93dB 96dB
Short Term SPL, 1m 96dB 100dB 104dB
Peak SPL, 1m 100dB 104dB 107dB
Harmonic Distortion 3%, 70-200Hz 2%, 50-200Hz 2%, 50-200Hz
Harmonic Distortion, >200Hz 0.5% 0.5% 0.5%
Amplifier power 18W + 18W Class D 50W + 50W Class D 50W + 50W Class D
Input Ethernet (PoE, AoIP) Euroblock, Ethernet (PoE, AoIP) Euroblock, Ethernet (PoE, AoIP)
Powersource PoE+/PoE PoE+/PoE PoE+/PoE
Power consumption
ISS Active 3W 4W 4W
Idle 4W 5W 5W
Full power 30W 25.5W 25.5W
Dimensions (HxWxD) 181 x 121 x 115mm 226 x 151 x 142mm 285 x 189 x 178mm
Weight 1.5kg 3.1kg 5.1kg