MUXLAB 500713 VIDEO EXTENDER Kit, 12G-SDI over SM fibre, 4K/60, 10km reach

500502 - DisplayPort, 200m

Compromising of 500502 transmitter and 500502 receiver, this extension kit has been designed to enable to user to transmit WQUXGA (3840 x 22400) video at 60Hz over a distance of up to 200m. Any form of scaling or data compressions can be applied to the signal, with a data throughput of 21.6Gbps (5.4Gbps per lane) supported.

500502 supports auxiliary/I2C channel over fibre, along with support for Dual-Mode DP (DP++). Connections include single male DisplayPort connector, dual LC optical connectors, and single MicroUSB connector which can be used for external power.

Dimensions : 26 x 72 x 15 (WxDxH) mm. Weight: 0.45kg.

500461 - HDMI, 300m

A HDMI extender kit designed to transport HDMI type A signal over OM3 LC Duplex fibre up to a distance of 300m. Powered via micro-USB connector and included USB type A to microUSB cable, supports 4K resolution at 24, 25, or 30Hz whilst supporting HDCP. 1080p resolutions at 24, 50, and 60FPS are also supported.

Dimensions: 70 x 20 x 8 (WxDxH) mm. Weight: 0.13kg.

500462 - HDMI, 300m

This HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated and connected up to 300m. The kit also allows unidirectional communication (with no return signalling) via one OM3 multimode fibre cable in a point-to-point configuration at 1080p resolution. A high separation between the source computer and the display devices is established to prevent any potential leakage between the source and the peripheral equipment; removing the vulnerability of shared display equipment to issues such as cyber-attacks.

500462 kit includes 1x transmitter, 1x receiver, and 2x power supplies.

Dimensions: 83 x 50 x 19 (DxWxH)mm. Weight: 0.45kg

500464-V2 - HDMI, 1km

A HDMI extender kit capable of distances up to 1000m over OM4 multi-mode fibre. 500464-V2 supports a total data throughput of 18Gbps, 6Gbps per lane, as well as formats including HDR10+, Dolby Vision, HLG, CED, ARC, EDID and HDCP 1.4/2.2. OM3 cable may be used however the total distance covered will be at shorter distance.

Each part features a single female HDMI connector, single, SC optical connector, and single micro-USB connector for providing external power. The kit includes 2x 1m HDMI cables.

Dimensions: 63 x 35 x 15 (WxDxH) mm. Weight: 0.32kg.

500485 - HDMI, 10km

A HDMI extender kit in a professional style casing. Distances of up to 10km over single mode fibre optic cable can be achieved for HDMI and USB 1.1. Video resolutions up to 4K/2K at 60Hz are compatible, and the kit also supports IR and RS-232 pass-through.

A wall mount bracket and screw kit is included.

Dimensions: 125 x 112 x 28 (WxDxH) mm, transmitter/receiver. Weight: 0.46kg, transmitter; 0.45kg, receiver.

500767 - 3G-SDI, 400m

Available as transmitter or receiver for UTP or multimode, 500767 is a gateway converter that allows the transference of uncompressed SDI video up to 3G 1080p at 60Hz. Useful for commercial broadcast, news, sports, and TV station services, the gateway converter can be implemented in a point-to-point or multipoint-to-multipoint configuration. A 1G Ethernet switch port allows the user to connect additional network devices, whilst a RS232 port is included to assist remote control. Supporting SMPTE ST-2110 the unit can be managed via a web interface and an NMOS (Networked Media Open Specifications) system via a RestAPI.

Options

Dimensions: 111 x 120 x 25 (WxDxH) mm. Weight: 0.7kg.

500767-2110 - 3G-SDI/ST2110, 400m

Available in two options, 500767-2110-MM for OM fibre compatibility, and 500767-2110-UTP for UTP compatibility, these transceivers offer an uncompressed gateway of 3G-SDI/ST2110 over IP protocol. Particularly useful in the broadcast sector point of source extension of up to 400m (MM version) or 30m (UTP version). The devices support ST-2022-7, class D redundancy for fail-safe operation when used over two independent 10G Ethernet networks. A 1G Ethernet network port is provided for external control via 3rd party platforms that support RestAPI or NMOS.

Options

Dimensions: 111 x 120 x 25 (WxDxH) mm. Weight: 180g.

500712 - 6G-SDI, 20km

500712 has been designed for video production and broadcasting, OBVs, and medical imaging display and is capable of extending 3G-SDI, 6G-SDI, HD-SDI up to 6Gbps to a distance of up to 20km point to point. It supports 4K, 30Hz over single mode fibre, as well as SMPTE 2081, SMPTE 424M, SMPTE 292 and SMPTE 259 standards.

The transmitter has a single 75 ohm female BNC SDI input on the front panel and duplex LC single-mode fibre connector on the rear panel. An included 12V DC, 6W supply connects to a 2mm locking power supply connector located on the rear panel. Green signal-present and power LEDs are also situated on the front panel for quick reference. The receiver has the same connections with the exception of the BNC connector which is an input on the transmitter and output on the receiver. A power supply for the receiver is also included in the kit.

Dimensions: 76 x 76 x 25 (WxDxH) mm. Weight: 1kg.

500732 - 6G-SDI, 400m (80km)

This series of video extenders is available with a choice of fibre optic SFP adapters to extend SDI cameras or other SDI sources, in up to 4K resolutions, over distances ranging from up to 300m using OM3 fibre, to 40km using single-mode fibre. The models allow 'versatile combinations of sources such as one 6G SDI source, two 3G-SDI sources or four HD-SDI sources'. RS232 pass-through is also provided. These kits supports all 6G channel configurations (1/2/4), with a maximum supported resolution of 4096 x 2160 at 24/25 frames per second, 3840 x 2160 at 30 frames per second. SDI link recognition and configuration is automatic.

The transmitter has, on the front panel, five BNC connectors for four SDI inputs and one sync connection. The rear has a slot for a SFP+ module and a terminal block for the RS232 interface, while the top has a mini USB connection for firmware updates and control, as well as status LEDs for each of the four SDI connections plus 'Sync' and 'Pwr'. The unit has multiple 1/4 inch threads 'for camera mounting or equipment attachment'. On one side there is a coaxial power inlet.

The receiver has four BNC connectors for the SDI outputs, plus one for a sync input connection, on the front. The rear has a slot for a SFP+ module and a terminal block for the RS232 interface. The top has a mini-USB socket, for firmware updates, and status LEDs, one for each SDI channel plus 'Pwr' and 'Sync'. On one side there is a coaxial power inlet.

Dimensions: 110 x 110 x 32mm, approximately, transmitter and receiver. Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M. Control: Serial console emulation with USB interface. Power source: 12V DC, 1.25A from two included AC adapters.

The transmitter and receiver of the 500732 are each supplied with a 10G SFP+ fibre transceiver with LC connectors for use with duplex OM3 or OM4 multi-mode fibre, giving 300 or 400 metre reach respectively. 500732-SMXX models operate over SM single-mode fibre for longer distances.

Models available

* this unit requires a 5dB attenuator for distances under 10km
** this unit requires a 10dB attenuator for distances under 35km

500734 - 6G-SDI with return channel, 400m (80km)

This 6G-SDI extender is designed to extend the signal path of SDI cameras and other SDI sources with a return channel, to ranges up to 400m using OM4 multi-mode fibre. Multi channel transmission is capable of 9Gbps data throughput and allows combinations of source including one 6G-SDI signal and one 3G-SDI, two 3G-SDI signals and two HD-SDI signals, or other combinations up to 9Gbps. The SDI return channel can be used for AVE monitoring and talkback with the RS232 pass-through supporting the return of 'tally light' and camera control unit (CCU).

The transmitter has five 0.8V pp, 75 ohm BNC connectors (1x input, 1x output, 3x configurable I/O), SPF+ connector for optical fibre, terminal block for RS232, mini-USB for service and firmware updates via connected PC, and locking 12-48V DC power input. Power, pass-through, and SDI link status can be identified via LEDs mounted on the top panel. The receiver has the same connections and status LEDs as the transmitter.

Models available

* this unit requires a 5dB attenuator for distances under 10km
** this unit requires a 10dB attenuator for distances under 35km