UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

9 January 2025

RDL RU-NL2P DANTE INTERFACE Output, 2x line out, terminal blocks, POE

Stock code
57-4806
Brand
RDL (Radio Design Labs)
Model number
  • RU-NL2P
RDL RU-NL2P DANTE INTERFACE Output, 2x line out, terminal blocks, POE
RDL RU-NL2P DANTE INTERFACE Output, 2x line out, terminal blocks, POE

RDL AV INTERFACES - RACK-UP Series

RDL Rack-Up series are 1/3 rack-width, rack-mounting modules, 1U high, offered with a wide range of functionality. Some Rack-Up modules are constructed in solid, encapsulated, durable, industrial, black plastic enclosures; Max Rack-Ups are assembled using heavy-duty, extruded-aluminium and steel panels. The rear panels have 'clear bold white lettering' for the terminal blocks and connectors. Reverse-printed, front-panel, poly-carbonate laminates provide a durable finished appearance for rack-mounted or free-standing use. Certain Rack-Up modules are often used free-standing; all Rack-Ups may be rack mounted by means of a range of mounting options, listed within this group.

DANTE INTERFACES - Format-A - Input

DANTE INTERFACES - Format-A - Output

DANTE INTERFACES - Output

These modules interface standard line-level audio signals with a DANTE audio network, providing 'flexibility, economy and simplicity' to DANTE networked audio systems. Built in RDL's 'Rack-Up' packaging, they will mount directly to surfaces or using a range of mounting options. Each provides line-level outputs from two or four DANTE network audio channels. They are offered with or without a POE (power over Ethernet) facility.

DANTE is a software and hardware solution, offering high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with low latency and accurate synchronisation.

Network connector: RJ45 with Link and Speed indicators
Transmission rate: 100Mb/s
Sample rates: 44.1kHz, 48kHz (default)
Bit depth: 24 bits
Audio operating levels: -18dBFS = +4dBu
Output connectors: Detachable terminal block
Outputs: 2x +4dBu, balanced; 150 ohms
Response: 20Hz - 20kHz +/- 0.5dB
Distortion: Less than 0.05% THD+N
Noise: Less than -80dB with output active, -95dB with output muted, below +4dBu.
Crosstalk: Less than -85dB, 20Hz - 20kHz
Headroom: More than 18dB above +4dBu
Indicators: Ethernet link and speed, network sys and sync LEDs; 2x output signal, 2x dual output and power-in LEDs
Power input: Coaxial power socket
Temperature: 0 to 40 degrees C
Power source: 24V DC, 120mA or POE where fitted
POE: Class 0, IEEE 802.3af, where fitted
Dimensions: 150 x 43 x 132mm (w x h x d)

Optional accessories: Mounting accessories offer a variety of mounting panels, trays, brackets and adapters. 57-402, an 'RDL PS-24AX POWER SUPPLY Universal, 24 volt, 500mA, UK plug' is a suitable power supply.

The models differ principally in the number of DANTE channels interfaced and powering arrangements.


RU-NL2

The RU-NL2 provides line-level outputs from two DANTE channels. It is powered from an external 24V DC power supply, available separately.


RU-NL2P

The RU-NL2P provides line-level outputs from two DANTE channels. It is equipped to operate from a POE-enabled network switch. It will reserve power from the switch even while being powered from an external 24V DC supply. If POE power and an external 24V DC supply are both feeding an RU-NL2P, the unit will run from the external supply and will switch over to POE power upon loss of the external supply.


RU-NL4

The RU-NL4 provides line-level outputs from four DANTE channels. It is powered from an external 24V DC power supply, available separately.


RU-NL4P

The RU-NL4P provides line-level outputs from four DANTE channels. It is equipped to operate from a POE-enabled network switch. It will reserve power from the switch even while being powered from an external 24V DC supply. If POE power and an external 24V DC supply are both feeding an RU-NL4P, the unit will run from the external supply and will switch over to POE power upon loss of the external supply.

DANTE INTERFACES - Format-A - Bi-directional

DANTE INTERFACES - Terminal block - Bi-directional

AUDIO DISTRIBUTION – Format-A

MIXERS - DANTE

MIXERS - Analogue

ATTENUATORS

DISTRIBUTION AMPLIFIERS

POWER AMPLIFIERS

HEADPHONE AMPLIFIERS

PREAMPLIFIERS

EQUALISERS

AUDIO METERS

SWITCHERS

SEQUENCING CONTROLLERS

CONVERTERS

Powering

Powering: All units require a 24V DC power supply; each has both screw terminals and coaxial socket for power input. A ‘universal’ supply is available, 57-401, with 24V 3A output, which requires an IEC cord set. See RDL POWER SUPPLIES for more details. Note that all RDL modules with co-axial power input/output sockets use connectors with 2.5mm pins.