Bella 22 mkII is a 2-bus summing matrix confidence monitor, designed for outside broadcast trucks, studio, theatre and professional audio applications, enabling the monitoring of multiple network audio sources. Bella 22 mkII is available in two versions as Bella 22 mkII (Dante/AES67 network compatible), and Bella 22/R mkII (Ravenna/AES67 network compatible). Bella 22/R MKII has all the functionality of Bella 22 MKII however it uses Ravenna network protocols.
Ten front panel volume controls can control a single or two network audio inputs, and the output of each of these controls can be routed to the left or right mix busses. In addition to the twenty network audio inputs, two analogue inputs are also provides for added versatility. Ten channel on/solo switches are provided enabling sources to easily be turned on/off the loudspeaker monitoring mix, or soloed to this mix if required. In addition to the loudspeaker monitoring mix there is a second mix bus that provides a permanent mix output from the ten input circuits. Three line level analogue outputs are provided along with an AES3 output. These follow the switched/solo mix buss.
The front facing panel of the Bella 22 mkII has ten round yellow illuminated switches control various features including the input of the associated channel on/off, the loudspeaker, analogue, AES3 and mix/solo network audio outputs. Pressing and holding one of these switches will solo the corresponding channel output to the loudspeaker, analogue, AES3 and mix/solo network audio outputs. There are also ten input source controls, and each of the ten input channels has two network audio sources associated with it. These appear in Dante controller and the channel number followed by ‘L’ (left) or ’R‘ (right). The source input control is a 3 position toggle switch. Moving this switch left will route just the left audio input to the channels output routing switch; moving it right will route just the right audio input to the channels output routing switch and in its central position both left and right inputs will be sent to the channels output routing switch. There are also ten output routing controls by way of 3-position toggle switch. This will route the selected input(s) to the left/right or both (left and right) mixes. The selected input (left/ right channel) has a bearing on what is actually routed to the mix circuits. On the tenth channel there is an input select switch that gives the option of taking its left and right audio inputs either from the Dante /AES67 audio network OR from a pair of local analogue audio inputs on the rear of the Bella 22 mkII.
There is a dim switch on the right of the Front panel that when used this illuminated switch will dim both the front panel loudspeakers, the analogue and the AES3 outputs. It will also dim any of the network outputs circuits that are after the dim control. A rear panel GPI circuit also affects the state of this switch. If the rear GPI circuit is made then the switches internal LED will illuminate and pressing the switch will not turn the dim on or off. Next to the dim switch is the cut loudspeaker switch. When used this illuminated switch will cut both the front panel loudspeakers, the analogue and the AES outputs. It will also cut any of the network output circuits that are after the cut control. The rear panel GPI circuit also affects the state of this switch in the same way as the dim switch. There is a second rear panel GPI circuit that can be used to cut just the internal loudspeakers. If this second GPI circuit made then the internal loudspeakers will be cut, but internal LED will not be on and this switch will continue to operate a cut on the analogue, AES3 and network outputs.
The front panel of the Bella 22 mkII has ten input level controls, these controls adjust the incoming audio level by applying gain/loss to it. Audio present indicators will illuminate to show a valid audio is being detected on the channel prior to the level control. It will illuminate when an incoming audio circuit is at -20dBu or above. Once illuminated it will stay illuminated for three seconds after it detects the input level to fall below -20dBu. If the LED flashes this indicates that the input level is either clipping or within 1dB of clipping.
There is one master output level control that can adjust the overall output level of the unit. It adjusts the level to the internal loudspeakers, headphones, analogue outputs, AES3 output and the network audio outputs that are affected by it. In its 12 o’clock position it is a unity gain. Fully clockwise 10.6dB of gain will be applied to the output. Fully anti-clockwise 30dB of loss will be applied to the output. There is a 6.35mm TRS headphone jack socket that provides a stereo output for monitoring the mix/solo buss. Inserting a jack into this socket will cut the internal loudspeaker, the analogue and ASE3 audio outputs and any network audio outputs affected by the cut circuit. It is suitable of use with headphone with impedance of 100- 2000 Ohms.
The Bella 22 mkII left panel loudspeaker is fed audio from the left output of the mix/solo mix buss. The front panel overall level control adjust its volume and the front panel Cut and Dim switches also affect it. There is a rear panel GPI that can turn the internal loudspeakers off. Inserting a headphone jack in the head phone socket also turns the loudspeaker off. The right panel loudspeaker is fed audio from the right output of the mix/ solo mix buss. The front panel overall level control adjusts its volume and the front panel Cut and Dim switch also affect it. There is a rear panel GPI that can turn the internal loudspeakers off. Inserting a headphone jack in the head phone socket also turns the loudspeaker off.
On the rear panel of the Bella 22 mkII, from left to right, there is a standard IEC mains plug that accepts external AC voltages of 100-240 VAC+/- 10%. There is an internal fuse and maximum current consumption is 10W. There are two copper RJ45 Ethernet ports that can accept standard network cables. Only one port is required to be connected to your network to correctly pass Dante/AES67 network audio, however both the primary and secondary ports can be used if a redundant network topology is in use. Both ports are gigabit Ethernet and the LEDs flash to indicate data is being correctly communicated with a switch. There is an update socket that is used only be a Glensound authorised engineer in the unlikely event that the new internal microprocessor code is required to be installed in the Bella 22 mkII. The internal microprocessor is a PIC. There is one 9 pin D plug that provides access to the GPIO (general purpose inputs and outputs) circuits. These are useful for connection to external devices such as red light systems.
The AES3 output is an output of the mix/solo buss’ left and right channels. This circuit’s sample rate is 48kHz and it is driven as a direct output from the internal DSP. There is 3 analogue output XLRs, marked as ‘mix out, ‘R’ (right), ‘L’ (left) and ‘Mono’. These are line level electronically balanced analogue audio circuits with a nominal line up level of 0dBu. Being electronically balanced they can be wired unbalanced if required. The audio being routed to these circuits in the output of the mix/Solo mix buss and they are affected by the Cut and Dim LS circuits and the overall level control.
There are two local audio input XLRs that are both balanced analogue with line-up of 0dBu. They are electronically balanced and their inputs can be wired unbalanced. Their audio input is fed into the mix busses via the input channels ten ‘Dante/local’ toggle switch. The switch needs to be in the ‘local’ position for the outputs of these audio input to be fed into the mix buss.
Audio: Channel input gain controls: +10.6 to -31dB. Loudspeaker/headphone gain control: +10.6 to -31dB. Channel off switch: Fully muted (- infinity dB) when off. Channel input select switch: Left Ch only, Right Ch only, Both Channels (stereo). Channel output routing switch: Left Ch only (selected Inputs mono'd), Right Ch only (selected inputs mono'd), both channels (stereo if both I/Ps selected). Analogue input type: Electronically balanced (can be wired unbalanced). Analogue input impedance: greater than 20kOhms. Analogue input connectors: Neutrik XLR. Analogue input line up: Line level (0dBu). Analogue input frequency response: greater than or equal to-0.5dB, 22Hz to 22kHz, measured at mix output mono. Analogue input THD + Noise (ref +8dBu): greater than or equal to 0.004% at 1kHz. Analogue output type: Electronically Balanced. Analogue output connectors: Neutrik XLRs. Maximum analogue output level: +17.4dBu. Analogue output frequency response: greater than or equal to -0.1dB, 22Hz to 22kHz. Analogue out THD + Noise (ref +8dBu): less than 0.002%, at 1kHz. Headphone impedance: 100 to 1000Ohms. Maximum headphone level: +17dBu, into 600 Ohms. Present LED threshold: -20dBu. Present LED hold time: 3 seconds. Present LED clip indication: Flashes within 1dB of clip point.
Network: Network Protocol: Dante, Bella 22 mkII; Ravenna, Bella 22/R mkII. AES67: Compliant. DDM: Certified. Full Scale: 0dBu =-18dBFs. Sample frequency: 48kHz. Resolution: 24 Bit. Network interface type: Gigabit Ethernet. Weight: 1740g
Included items: 1x 2m RJ45 cable, handbook (download also available), IEC mains cable