UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

21 January 2025

RDL FP-MPA2 MICROPHONE PREAMPLIFIER Dual channel, 12/24/48V phantom power, XLR I/O

Stock code
58-540
Brand
RDL (Radio Design Labs)
Model number
  • FP-MPA2
RDL FP-MPA2 MICROPHONE PREAMPLIFIER Dual channel, 12/24/48V phantom power, XLR I/O
RDL FP-MPA2 MICROPHONE PREAMPLIFIER Dual channel, 12/24/48V phantom power, XLR I/O

RDL AV INTERFACES - FLAT-PAK Series

RDL Flat-Pak products are constructed in compact, low-profile, shielded, heavy-duty metal chassis. They can be directly screwed or bolted to cabinets or shelves. Accessories permit mounting single or multiple modules to front or rear rails, while adjacent mounting of modules is facilitated by 'daisy-chaining multiple modules from a single power supply using included power interconnect cables'. The series provide 'the most common connections in professional installations', including 'gold-plated jacks, detachable and fixed terminal blocks'. Bold, high contrast labelling 'facilitates connection and adjustment in confined or dark locations'. LED metering and indicators shorten setup and adjustment time.

AUTOMATIC LEVEL CONTROLLERS

CONVERTERS

DANTE INTERFACES

AUDIO SENDERS – Format-A

MIXERS

PARAMETRIC EQ

MICROPHONE PREAMPLIFIERS


FP-MP1 Microphone Preamplifier

A single-channel high quality microphone pre-amplifier with XLR and detachable terminal-block input and output connectors. A three-position switch selects phantom power 24V, 12V or OFF, another switch selects normal (45-55dB) or high (55-65dB) gain with a 10dB gain trim. A switchable low-cut filter (80Hz 6dB/octave) is also provided. Two LED indicators indicate signal level. Input impedance: 2 kohms; input clipping level: -21dBu; frequency response: 20-30,000 Hz (+ or - 0.25 Hz) THD<0.1%; Equivalent input noise: <-130dB. Supply 24V 100mA. Dimensions (l x h x w): 107 x 34 x 83mm


FP-MPA2 Dual Phantom Adaptor

Two independent channels of phantom power supply, with XLR input and output connectors. Each channel has 12/24/48V voltage selection with two power output options for the 24v supply (1.2 or 2.4 kohm load). Complies with IEC1938:1996-12. Supply 24V 120mA. Dimensions (l x h x w): 181 x 37 x 83mm

DISTRIBUTION AMPLIFIERS

POWER AMPLIFIERS

POWER INSERTERS

REPEATER/AMPLIFIERS

MESSAGE REPEATERS

Mounting Accessories

The Flat-Pak range all have the same width, with mounting flanges that offer a variety of fixing options. The flanges have notches for simple fixing to a surface using screws and, using special mounting brackets, can be slotted onto RDL 2U rack-mounting panels.

Powering

Powering: All units require a 24V DC power supply; each has both screw terminals and coaxial socket for power input and an additional coaxial socket to feed supply to other modules. A 'universal' supply is available, 57-401, with 24V 2A output, which requires an IEC cordset. See RDL POWER SUPPLIES for further information and a variety of mounting options. Note that all RDL modules with co-axial power input/output sockets use connectors with 2.5mm pins.

Ordering note: All modules are supplied with a datasheet and a power interconnection cable, to cascade power to another module.