A professional, hand-held, analogue-audio signal-analyser, with built-in microphone, balanced and unbalanced line inputs, 100 x 64 pixel back-lit LCD display and simple, menu, control buttons.
The display-screen shows menu options and measurement values, with either large-scale numerical read-out or graphic display (including frequency-response and oscilloscope). Auto-ranging algorithms provide fast, accurate readings, with a minimum of menu selections for rapid testing and analysis. A 3.5mm headphone jack-socket is also provided, for aural monitoring. Minilyzer can be used with the NTI Audio Minirator or other signal sources, such as Canford “Quick Check” test media. Battery-powered (3 x AA dry or NiCd), with over 16 hours continuous use (typical) from alkaline batteries. A carrying pouch is also available.
Technical Specification
Input connectors: |
Balanced XLR, unbalanced RCA (phono) |
Frequency range: |
20-20,000 Hz, resolution 0.1% |
Level range (dBu or dBV): |
+20 to –95 dBu balanced; +14 to –95 dBu unbalanced |
Level range (V RMS or V peak): |
4 digits, max 7.75 V RMS (balanced input) |
Resolution |
0.1dB/±0.5% |
PPM/VU range: |
Dual linear bar as PPM Type 1, IIA, Nordic, VU |
Signal balance: |
Deviation from balance shown in % or dB (0 to –60) |
Distortion range: |
–99.9 to 0dB THD, 10-20,000 Hz; residual THD+N <–85 dB(0.005%) at 0dBu, unweighted |
Polarity function: |
Built-in microphone input |
Oscilloscope: |
Auto-ranging, scaling and triggering |
Filters: |
Unweighted; A and C weighting; high-pass 22, 60 or 400 Hz; band-pass 300-3,000 Hz |
Dimensions: |
163 x 86 x 45 (w x h x d ) mm |
Weight: |
300 g, including batteries |
An upgrade kit is available to provide PC connectivity and data storage via USB for NTI Audio (formerly Neutrik) Minilyzer and Digilyser. The kit includes a plug-in board, replacement battery covers, USB cable and software CD-ROM. See NTI AUDIO MINILINK.
The MiniSPL is a 1/2” omni-directional pre-polarized condenser microphone that can be used in conjunction with the Minilyzer to form a comprehensive integrating sound level meter. It is battery powered.
Technical Specification
Microphone type: |
1/2”, omni-directional, pre-polarized condenser, free field transducer |
Sensitivity: |
(20±2) mV/Pa, (-34±1) dBV/PA @ 1kHz, balanced out |
Frequency response: |
100Hz - 1250Hz ±1.5dB |
|
20Hz - 20kHz ±3dB |
Peak acoustic input: |
130dB SPL @ 1kHz |
Noise: |
30 dB SPL, A-weighted |
Output impedance: |
200 ohm (XLR balanced) |
Power supply: |
1 x AA size 1.5V battery, lifetime typically 300 hours |
|
No phantom power required, phantom power resistant |
Dimensions: |
22mm diam. x 180mm |
Weight: |
100g including battery |
Ordering Note
Unless otherwise stated, all products are exclusive of calibration certificate(s). NTi ML1 Minilyzer calibration certificates can be purchased optionally along with the product. Please ensure you add multiple calibration certificates if the system you are purchasing includes multiple products.