These models from the Mountlogic and Ventry ranges suit flat-screens with VESA patterns from 75 x 75mm to 400 x 400mm, supporting screens from 15kg to 40kg in weight and with diagonals up to 50 inches natively. Some may be fixed to poles using B-tech accessory collars.
Mountlogic Range - Professional
Designed for the professional installer, this range of mounts provides 'simple, cost effective flat screen mounting solutions for commercial and public installations'. Simple mounting and on-wall levelling aid installation. Wall arms have cable management clips, pin-hex security screws are used as standard to provide security and additional safety.
Mounts are supplied with security locking screws and hex-key; fitting hardware is included.
Feature matrix:
Note(1): Maximum weight, size. (2): Wall to screen mounting plate. (3): Tilt is vertical adjustment. (4): Swivel is horizontal adjustment at interface. (5): Swivel is horizontal adjustment at wall. This does not take account of any obstructions which may prevent these adjustments. (6): Number of BT7260 or BT7052 accessory collars needed to fasten the mount to 60mm, 50mm poles.
This is a low-profile model, mounting the screen parallel to the wall.
With a larger spacing from the wall, these models allow the screen to be tilted in the vertical plane.
BT7518, BT7514 - With tilt and swivel
These allow tilt in the vertical plane and horizontal swiveling; the BT7514 is used with the included shorter arm.
BT7512, BT7514 - Single arm, tilt, swivel
A vertical wall plate interfaces to an arm which can swivel through 180 degrees. At the joint between the arm and the screen mounting plate there is 240 degrees of swivel. The BT7512 allows the screen to be rotated through 360 degrees to allow for landscape or portrait positioning. Clips for cable management are included. The BT7514 is used with the included longer arm in this configuration.
BT7513, BT7515 - Double arm, tilt, swivel
With two arms linking between the mounting plate and the wall plate, these are 'full-motion' mounts, suitable for corner mounting. There are 180 degrees of swivel available at the wall-plate, 360 degrees at the joint between the two arms and 240 degrees at the screen mounting-plate. The BT7513 allows the screen to be rotated through 360 degrees to allow for landscape or portrait positioning. Clips for cable management are included.
Designed to be used with touch screens such as the Samsung Flip screen, this mount can be fixed to a wall or be pole mounted using B-Tech system 2 collars. The mount allows the rotation from landscape to portrait through 90 degrees without the need for tools. The adjustment can be made before or after installation.
Ventry Range - Consumer
These are low-cost alternatives to the Mountlogic range. Perhaps more suitable in less arduous environments, all are designed to support flat screens securely whilst offering 'excellent value for money'. Mounts are supplied with fitting hardware and have have cable management clips, inbuilt spirit level and padlock facility (lock not included) unless otherwise stated.
Feature matrix:
Note(1): Maximum weight, size. (2) Wall to screen mounting plate. (3): Tilt is vertical adjustment, pivot is horizontal adjustment, at the joints. This does not take account of any obstructions which may prevent these adjustments.
This is a low-profile design, with simple 'hook-on' installation mounting the screen parallel to the wall. A locking-screw is provided to prevent screen removal. No cable management, spirit level, padlock facility
BTV112, BTV502 - With tilt and swivel
These allows tilt in the vertical plane and horizontal swiveling. The screen may be rotated through 360 degrees to allow for landscape or portrait positioning.
BTV113, BTV503 - Single arm, tilt, swivel
A vertical wall plate interfaces to an arm which can swivel through 180 degrees. At the joint between the arm and the screen mounting plate there is 240 degrees of swivel. The screen may be rotated through 360 degrees to allow for landscape or portrait positioning.
BTV114, BTV504 - Double arm, tilt, swivel
With two arms linking between the screen mounting plate and the wall plate, these are 'full-motion' mounts suitable for corner mounting. There are 180 degrees of swivel available at the wall plate, 360 degrees at the joint between the two arms and 240 degrees at the screen mounting plate. The screen may be rotated through 360 degrees to allow for landscape or portrait positioning.
BT7502 Adapter Plate
To adapt the mounts to alternative VESA mounting pitches. It has fixing holes on standard VESA 100mm pitch to fasten to the mount, with further holes to mount a screen with VESA FDMI MIS-E fixing threads, either 200mm x 200mm or 200mm x 100mm, as fitted to larger screens. The mount is still restricted to the 20kgs maximum weight; for mounting heavier screens see B-TECH FLAT SCREEN MOUNTS - Wall.