MicW SA013 SPLITTER ADAPTER For 2x iSeries microphones combined, moulded, Y shaped

This range, including adapters, splitters, an attenuator and phantom power adapter, is for use with various models of the iSeries microphones, either as replacements or as additional accessories.

The iSeries from MicW includes miniature recording designs, a Class 2 measurement microphone, miniature lavalier models, a shotgun model useful for camera-mounted work and a boundary layer design, suitable for interviews.

AC011 Case

This is a custom-designed aluminium tube, that can be used as a protective case for the microphone, which is also a microphone clamp, it has a standard 3/8 inch thread at one end so it can be mounted to a microphone stand or tripod. For i436, i456, i266.

ACC-SET1 Accessory Set

Contains: CB011, CB012, CL013, AC011, WS013, see below. For i436, i456.

ACC-SET2 Accessory Set

Contains: CB011, CB012, CL013, AC011, WS013, WJ011, see below. For i436, i456.

ACC-SET3 Accessory Set

Contains: WS810, BM100, PP013, CB030S, CB002S, SA012, SA011, PB031, see below. For iShotgun.

AT020 Attenuator

This is an in-line metal design, with a 4-pole socket at one end, for the microphone, and a 4-pole plug at the other end, to connect to the recording device. It provides a fixed 20dB attenuation, for use in environments where the output of the microphone may overload the input of the recording device. For all iSeries microphones.

BM100 Mini Boom

This is a miniature microphone boom with two sections, which extends to a maximum length of one metre. Useful to position a microphone close to a speaker when the location is crowded, it has a platform with a 1/4 inch threaded stud to fit the PP013 Shock Mount, and a ball-joint to angle the platform.

CB002S Adapter Cable

This has a 4-pole socket at one end, and a 3.5mm 3-pole male jack plug on the other, to suit cameras or recording devices fitted with a powered 3.5mm 3-pole input socket. The cable is 200mm long unstretched, with a coiled section in the middle extending the length to approximately 500mm.

CB011 Extension Cable

This is a simple extension lead, 4-pole socket to 4-pole plug, for use with any iSeries microphone. Length: 2 metres.

CB012 Splitter Cable

This is a break-out cable. A 4-pole plug fits the recording device; a moulding at the other end has two 4-pole sockets, one for a pair of earphones, one for any iSeries microphone. Due to to the spacing of the two sockets, larger connectors may not fit. Length: 100mm.

CB013 Adapter Cable

This has a 3.5mm 3-pole jack plug, to fit recording devices with a powered input socket, with a 4-pole socket for any iSeries microphone. Length: 150mm.

CB030S Extension Cable

This is a simple extension lead, 4-pole socket to 4-pole plug, for use with any iSeries microphone. Length: 3 metres.

CL013 Microphone Clip

For collar or lapel. A simple microphone clip. For use with i436, i456, i266.

CL018 Microphone Clip

For collar or lapel. A simple microphone clip. For use with i825, i855.

PB031 Case

This is a plastic case, as supplied with the iShotgun, with a cut-foam insert to take all the items contained in the iShotgun kit.

PI49 Adapter Cable

For use with professional phantom-powered microphone inputs, this has an in-line converter, to reduce the 48V phantom power, with a 3-pin male XLR connector to fit the input. A 150mm cable connects this to a 4-pole socket to use with any iSeries microphone.

PP013 Shock Mount

This is supplied with the iShotgun Kit. It is an elastic suspension to reduce noise transmitted to the body of the microphone. It has a foot to fit a camera accessory shoe, and a 1/4 inch threaded aperture to fit standard photographic threads, including the BM100 Mini Boom. For use with the iShotgun or other microphone of similar size and weight. (8mm diameter, 20g).

SA011 Splitter Adapter

This allows the use of a pair of earphones at the same time as a microphone. At one end of the moulded body there is a 4-pole jack to fit the recording device and a 4-pole socket for the earphones; the earphone cable thus comes back toward the device, so will only work with slim devices such as a phone. At the other end of the moulding is a 4-pole socket for the microphone, which is then positioned in-line with the phone. For use with any iSeries microphone.

SA012 Splitter Adapter

This allows the use of a pair of earphones at the same time as a microphone. The moulding is in a T-shape; the lower part of the 'T' has a 4-pole plug to fit a recording device. the upper bar of the 'T' has two 4-pole sockets, one for the earphones, one for any iSeries microphone.

SA013 Splitter Adapter

This is a 'Y' combiner. The lower part of the 'Y' has a 4-pole plug to fit the recording device, such as an iPhone. Two plastic 'ears' are positioned to prevent the adapter swiveling in the socket. Two iSeries microphones may the be plugged into sockets on each of the arms of the 'Y' adapter, which feed in mono to the phone, for use when conducting a face to face interview across a table.

TP011 Tape

One strip of five disposable, sticky mounting-pads, white, for use with i825, i855.

WJ011 Windjammer

A hairy wind cover, for use over a foam windshield. For use with i436, i456, i266.

WS012 Windshield

A black foam windshield. For use with i266 microphones.

WS013 Windshield

A black foam windshield. For use with i436, i456 microphones.

WS018 Windshield

A black foam windshield. For use with i825, i855.

WS810 Windshield

A black foam windshield. For use with the iShotgun.