UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

19 February 2025

FOCUSRITE REDNET D64R AUDIO INTERFACE Rackmount, 64x64 MADI optical/coax, Dante I/O, dual PSU

Stock code
95-8413
Brand
Focusrite
Model number
  • REDNET D64R
FOCUSRITE REDNET D64R AUDIO INTERFACE Rackmount, 64x64 MADI optical/coax, Dante I/O, dual PSU
FOCUSRITE REDNET D64R AUDIO INTERFACE Rackmount, 64x64 MADI optical/coax, Dante I/O, dual PSUFOCUSRITE REDNET D64R AUDIO INTERFACE Rackmount, 64x64 MADI optical/coax, Dante I/O, dual PSU

FOCUSRITE AUDIO INTERFACES - AoIP

Built on Focusrite’s decades of interface design experience and attention to audio detail, the RedNet series of audio interface has been designed for post production, broadcast audio, live sound and recording studio environments. These interfaces run with the flexibility of Dante, with some offering dual network connections and power redundancy.

RedNet A16R MKII Rackmount, 16x16 analogue I/O

RedNet D16R MKII Rackmount, 16x16 AES3 I/O

RedNet D64R Rackmount, 64x64 MADI/Dante bridge

RedNet D64R MADI Bridge is a 1U rack-mount unit that provides an interface between a MADI (AES10) device and the RedNet Ethernet audio system. Up to 64 channels of digital audio I/O is supported with sample rates of 44.1/48kHz, 32 channels at 96kHz, or 16 channels at 192kHz.

Primary and secondary Ethernet connectors positioned on the rear facing panel allow network reliability with 'seamless' switchover to a standby network in the event of a network failure. The network ports may also be used to daisy-chain additional units when operating in 'Switched' mode. Redundant power supplies (PSU A and B) with independent input sockets on the rear panel allow one supply to be connected to an uninterruptible source. Each PSU’s status can be monitored remotely over the network or from the front panel. The MADI connection can use both BNC coax and standard duplex fibre interfaces. A sample rate converter on each input and output allows operation with most MADI sources, irrespective of the sample rate or clocking of the Dante audio network. Word clock I/O on BNC connectors allows synchronisation of the Dante network or the MADI stream to house clock, plus syncing external equipment to the Dante network.

The front facing panel contains LEDs to confirm network status, sample rate, clock sources and MADI interface settings. There is also a latching on/off power switch positioned to the right hand side of the front facing panel.

Included accessories: 2x IEC AC mains cables, 2x IEC mains cable retaining clips, 1x 2m Cat6 Ethernet cable.

Sample rate lock range: 41 to 216kHz. Gain error: -0.01dB. Dynamic range: Greater than 139dB. THD+N: Less than -130dB, 0dBFS input. Latency: 43 to 196 samples. MADI clock sources: RedNet, MADI in, Word Clock. Supported sample rates: 44.1/48/88.2/96/176.4/192kHz at 24-bit. Clock sources: Internal, MADI, Dante network leader. MADI coaxial connector: 75ohm BNC. MADI optical connector: Duplex SC. Dimensions (HxWxD): 44.5 x 482.6 x 308mm. Weight: 3.74kg

RedNet HD32R Rackmount, 32x32 Pro Tools HD/Dante bridge

RedNet MP8R Rackmount, Mic preamp

RedNet AM2 Desktop monitoring unit

RedNet X2P Desktop, 2x2 analogue/Dante

RedNet R1 Desktop remote

RedNet PCIeNX Dante interface card