UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

19 February 2025

FOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 Dante

Stock code
95-8417
Brand
Focusrite
Model number
  • REDNET X2P
FOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 Dante
FOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 DanteFOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 DanteFOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 DanteFOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 DanteFOCUSRITE REDNET X2P AUDIO INTERFACE Desktop, 2x2 analogue, 2x2 Dante

FOCUSRITE AUDIO INTERFACES - AoIP

Built on Focusrite’s decades of interface design experience and attention to audio detail, the RedNet series of audio interface has been designed for post production, broadcast audio, live sound and recording studio environments. These interfaces run with the flexibility of Dante, with some offering dual network connections and power redundancy.

RedNet A16R MKII Rackmount, 16x16 analogue I/O

RedNet D16R MKII Rackmount, 16x16 AES3 I/O

RedNet D64R Rackmount, 64x64 MADI/Dante bridge

RedNet HD32R Rackmount, 32x32 Pro Tools HD/Dante bridge

RedNet MP8R Rackmount, Mic preamp

RedNet AM2 Desktop monitoring unit

RedNet X2P Desktop, 2x2 analogue/Dante

RedNet X2P is a stereo monitoring device that incorporates 2x local Red Evolution mic/line/instrument pre-amplified channels, along with 2-channels of digital to analogue conversion for Dante audio-over-IP signals. It provides high quality digital to analogue conversion for accurate monitoring on loudspeakers or headphones.

The rear facing panel houses 2x balanced XLR/Jack combination connector for microphone/line input. Each input has separate controls for gain, +48V phantom power, polarity inversion, Air mode, and a fixed 80Hz high-pass filter. The input encoders can function independently or be linked together, and the channels are sent to the outputs as either stereo or mono-summed. RedNet X2P includes two line-outputs on 3-pin XLR, and a stereo TRS 6.35mm headphone jack socket. Dual locking etherCON connectors are included on the rear facing panel to connect to the network and to daisy-chain to additional network devices. Power is via PoE or via the locking rear-panel barrel connector and included 12V DC power supply. Each PSU’s status can be monitored remotely over the network and on the LCD display.

Separate volume control knobs are provided for both headphone and line output levels, with the latter featuring corresponding buttons and LEDs to control and signify mute and input mix. An LCD display provides status information about the device, preamp controls, level metering and network flags, and lock information.

The unit is described as a 'sturdy road-worthy' enclosure that has been manufactured from aluminium, with non-slip feet to add stability and security when mounting on a flat surface. The device can also be mounted on top of a microphone stand by employing the 3/8-inch BSW threaded bush incorporated in the base.

Included accessories: 1x Ethernet cable, locking DC power supply.

Input gain range: 0-68dB in 1dB steps, mic/line/instrument. Maximum input level: Greater than +24dBu, mic/line; Greater than +15dB, instrument. Input impedance: 6.2kohm, mic/line; 2Mohm, instrument. Signal to noise ratio: -120dB, mic/line; -118dB, instrument. Frequency response: 20Hz to 35kHz, mic/line/instrument. High pass filter: -3dB at 80Hz, mic/line/instrument. Supported sample rates: 44.1/48/88.2/96/176.4/192kHz at 24-bit. Pull-up/down: -4%, -0.1, +0.1, +4.167. Clock source: Internal or Dante Network Master. Dimensions (HxWxD): 60.6 x 203.6 x 145.7mm. Weight: 0.81kg

RedNet R1 Desktop remote

RedNet PCIeNX Dante interface card