RYCOTE 039705 BASEBALL 21/22 MICROPHONE WINDSHIELD 21-22mm hole, 75mm diameter, black

Unlike the familiar Rycote Modular Windshields, these designs slip onto the body of the microphone. They may be used on handheld or with 'Softie', 'InVision Studio' or 'InVision Broadcast' lyre shock-mounts, for cylindrical and square microphones.

Constructed to offer the wind attenuation properties of a full sized windshield in a much smaller package, Baby Ball Gags (or BBGs) are suitable for low-profile boom applications as well as for use in hand-held operations and interviews. They are used widely for ORTF microphone pairs.

The windshield is constructed of the same material as the full size modular windshields, but rather than clipping to a microphone suspension, the Ball Gag is mounted directly on the microphone, a grommet gripping the microphone body. The microphone is pushed through the grommet, to completely enclose the microphone capsule, allowing the microphone to be hand-held, supported by clamp or a suitable mount such as the 'Softie', 'InVision Studio' or 'InVision Broadcast' shock-mount. The ball gag consists of two halves, which can be separated, to fit microphones with a ball-head or tapered body from inside the windshield.

Four sizes are available to fit nominally 20mm (011001), 21mm (011007), 22mm (011002), and 25mm (011003) microphone shanks respectively. Maximum head diameter: 80mm.

Optional accessories: For additional wind protection a furry Windjammer cover is available.

Rycote microphone Foams are slip-on foam windshields, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality, open-cell acoustic foam, resistant to moisture and UV light, these windshields offer up to 10dB wind noise attenuation, whilst keeping high frequency loss to a minimum. The range includes windshields for use with small-diaphragm microphones including some lavalier types, reporter microphones, and some large-diaphragm studio types as well as shotgun microphones. All the shotgun Foams can be fitted with an additional Windjammer synthetic fur covers, for a further 12 dB wind noise attenuation. The Foams are available with and without Windjammer.

Foams are listed with details of the diameter and depth of the recess to take the microphone. The 'hole' size given is the range of microphone diameters that can be accommodated. The length given is the length of microphone that will be covered by the foam. A foam should be chosen which will cover both the end of the microphone and all of the slots or other apertures in the microphone body.

This series of Mini Windjammer are designed for specific microphones and add a further 12dB of wind noise attenuation. The fur covers are ‘easy-to-fit slip-on’ design and also offer resistance to moisture and UV light.