UK Sales: 0191 418 1122 International: +44 191 418 1133
An extensive range of soldering, crimping and IDC tools from leading brands including Antex, Edac, Paladin Tools, BEL Stewart, Canford, Coax Connectors, Neutrik, Canare, Daniels, TUK and Belden.
A range of soldering irons and stands suitable for use with both lead and lead-free solder. TCS50W - Digital soldering iron, 50w, 230v, 2.3mm tip A digital mains powered…
Two versions are offered. A 60:40 tin-lead alloy solder is included for use by users who may still legitimately use leaded solder, however it must not be used in equipment which…
Professional quality tools for efficient solder removal. They have PTFE nozzles, and the extraction springs are located outside the vacuum chamber to prevent sticking and promote…
Crimps EDAC 516 and Varelco 8016 series contacts. Ratchet action for secure closing of crimp.
Crimps EDAC 516 and ELCO (Varelco) 8016 contacts. It features embedded pin locators to properly align pins to ensure accurate, reliable crimping, and soft rubber handles for user…
Ratchet type crimp tools suitable for both the Bel Stewart and generic RJ45 and RJ11 plugs supplied by Canford. They all have a full cycling, parallel action, ratchet crimp action…
This range of ratchet-action, precision, crimp tools for coaxial connectors are each supplied fitted with the appropriate die-set for Telegartner BNC HD connectors. The tools are…
A range of robust ratchet-action crimp tools each supplied with the appropriate die set specifically designed by Coax Connectors for use with their BNC, Micro BNC and DIN…
A range of insertion and extraction tools designed by COAX for use with their BNC, Micro BNC and DIN connectors. Note: The BNC insertion and extraction tool is developed for use…
A range of crimp tools, and die sets, required to assemble Neutrik Rear Twist and Push-Pull series BNC connectors. Crimp dies are supplied as a pair and must be ordered in…
A Swedish-manufactured crimp tool with scissors ratchet action, emergency release lever, and adjustable crimp force. Die sets are ordered separately as required. These are a…
A range of ratchet-action crimp tools with interchangeable die sets. All tools feature a fully-ratcheting cycle with safety release lever, six ratchet gear settings for adjustable…
Rugged, padded nylon zipper cases with zip closure and wrist strap, suitable for a crimp tool and four die sets, or five die sets if there is one in the tool. Dimensions: 280(l)…
A Paladin coaxial connector crimp tool plus three die sets, supplied in a padded case. Kits contain either the 1302 or 8000 crimp tool, plus die sets 2034, 2656 and 2699. The…
The Paladin 'SealTite Pro Crimper' crimps weatherproof and waterproof linear CATV 'F', BNC, RCA and right-angle compression-type connectors from most manufacturers for RG6, RG6…
Eight point crimp tool and contact positioner for miniature coaxial connectors, including DIN 1.0/2.3 types. Ratchet action for secure closing of crimp. Both the crimp tool and…
All termination of wires on Krone connectors must be carried out using a special tool. The tool applies the correct pressure to both wire and contact and trims the excess wire off…
A selection of crimp tools to terminate Cat5E, Cat6 and Cat6A plugs. T23R A ratchet type tool for crimping RJ45 type connectors. Two die sets are available; one is for Cat5E…
The SPEEDYRJ45 range is designed to simplify twisted-pair terminations by allowing the wires to be inserted through the connectors and out of the front. This allows the…
Claimed by the manufacturer to be ‘the world’s easiest terminating RJ45 plugs’, these simplify twisted-pair terminations by allowing the wires to be inserted through the…
A parallel press tool to assist in ethercon CAT6A cable and panel connector termination.
A range of tools that are designed to service the various Belden ranges of compression connectors. CPLCCT-SLM Standard compression tool The Belden CPLCCT-SLM compression…
Ratchet-action crimp tool and insertion/extraction tool suitable for use with the crimp contacts in our range. See "D-SUB CONNECTORS" and see "D-SUB ADAPTERS" for details.
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
