UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

11 January 2025

FOCUSRITE REDNET A16R MKII AUDIO INTERFACE Rackmount, 16x16 analogue, 2x Dante I/O, dual PSU

Stock code
95-8411
Brand
Focusrite
Model number
  • REDNET A16R MKII
FOCUSRITE REDNET A16R MKII AUDIO INTERFACE Rackmount, 16x16 analogue, 2x Dante I/O, dual PSU
FOCUSRITE REDNET A16R MKII AUDIO INTERFACE Rackmount, 16x16 analogue, 2x Dante I/O, dual PSUFOCUSRITE REDNET A16R MKII AUDIO INTERFACE Rackmount, 16x16 analogue, 2x Dante I/O, dual PSUFOCUSRITE REDNET A16R MKII AUDIO INTERFACE Rackmount, 16x16 analogue, 2x Dante I/O, dual PSU

FOCUSRITE AUDIO INTERFACES - AoIP

Built on Focusrite’s decades of interface design experience and attention to audio detail, the RedNet series of audio interface has been designed for post production, broadcast audio, live sound and recording studio environments. These interfaces run with the flexibility of Dante, with some offering dual network connections and power redundancy.

RedNet A16R MKII Rackmount, 16x16 analogue I/O

RedNet A16R MkII is a 1U rackmount audio interface that allows sixteen channels of analogue to digital and digital to analogue, plus 1x AES3 channel-pair, for the Dante AoIP network. Designed for use on-the-road, in live sound, and broadcast environments, A16R MkII includes features including network and power redundancy, 'rugged construction', latching connectors, remote control and remote monitoring. RedNet A16R MkII has a sample rate convertor on the AES3 input pair allowing operation with any AES3 source irrespective of the sample rate or clocking of the Dante network.

Primary and secondary Ethernet connectors positioned on the rear facing panel allow maximum network reliability with 'seamless' switchover to a secondary network in the unlikely event of a network failure. These ports may alternatively be used to daisy-chain additional units when operating in 'Switched' mode. PSU A and B connection offer redundant power supply, with separate input sockets on the rear panel allowing one supply to be connected to an uninterruptible source. Each power supply's status can be monitored remotely over the network or from the front panel. Audio I/O is provided by 4x 8-channel (AES59) combined analogue DB25 connections, and in addition, channels 17 and18 act as permanent AES3 audio output. Word clock I/O, which is connected via BNC connectors, allows synchronisation of the Dante network to house clock, or the syncing of external equipment to the Dante network. DARS reference can also be accepted via the 3-pin XLR input connector.

The front facing panel of the audio interface features a set of LEDs to confirm PSU status, network status, sample rate, clock sources and signal presence on both input and output. It also houses the on/off AC power switch. The tri-coloured input signal level LEDs illuminate green when a signal of more than -42dBFS is present, orange when -6dBFS or more, and red when at 0dBFS. The tricoloured output signal level LEDs change colour at the same fixed levels as the input LEDs.

Included accessories: 2x IEC AC mains cables.

Reference level, 0dBFS: +18/+24, line in/out. Level trim range: Mute, then -78 to 0dB, line in/out. Frequency response: 20Hz - 20kHz, line in/out. THD+N: Less than -105dB, line in; less than -100dB, line out. Convertor dynamic range: 120dB, a-weighted, line in/out. Sample rate range: 32 - 216kHz. Gain error: -0.3dB. Dynamic range: Greater than 138dB. Latency: 11 to 45 samples. Supported sample rates: 44.1/48/88.2/96/176.4/192kHz at 24-bit. Pull-up/down: -4%, -0.1, +0.1, +4.167. Clock source: Internal, Word clock, DARS, or Dante Network Master. Dimensions (HxWxD): 43.5 x 482 x 352mm. Weight: 4.75kg

RedNet D16R MKII Rackmount, 16x16 AES3 I/O

RedNet D64R Rackmount, 64x64 MADI/Dante bridge

RedNet HD32R Rackmount, 32x32 Pro Tools HD/Dante bridge

RedNet MP8R Rackmount, Mic preamp

RedNet AM2 Desktop monitoring unit

RedNet X2P Desktop, 2x2 analogue/Dante

RedNet R1 Desktop remote

RedNet PCIeNX Dante interface card