Heavy Duty
Modern adjustable mic arm with internal spring mechanism which eliminates the possibility of noise when adjusting in live conditions. Mic arm is locked using the locking knob positioned at the folding point of the arm. Supplied with a 3/8″ male threaded spigot. For tidiness, the mic cable (up to 6.5mm diameter, e.g. HST) can be threaded within the mic arm structure.
| Overall length: |
1030mm |
| Weight: |
1.22kg |
| Colour: |
Black |
| Capacity: |
Up to 1.2kg |
Internally wired arms
The heavy duty arm is available internally wired, using HST-R-M heavy duty polyurethane jacketed cable. The microphone end is terminated to an XLR 3 pin female via a 400mm tail, and the table end terminated to an XLR 3 pin male via a 300mm tail. The cable can be slid within the arm to alter the tail length at each end.
Mountings
Five different mountings are available, which suit both unwired and wired arms, order separately as required:
| Table bracket |
For mounting on horizontal surfaces, fixes with three wood screws. |
|
Black. |
| Wall bracket |
For mounting on vertical surfaces, fixes with three wood screws. |
|
Black. |
| G-clamp |
Clamps onto tables and work surfaces up to 70mm thickness. |
|
Black. |
| Flush bracket |
For flush mounting into work surfaces up to 45mm thickness. |
|
Requires 19mm mounting hole, supplied with fixing nut. Plain aluminium finish. (Not illustrated). |
| Weighted base |
Circular base, for free-standing applications, weight 5.5kg. Black. |
| Uplift bracket |
Gives 400mm uplift from a horizontal surface. Intended for applications where the arm has to be raised above VDUs etc. Base diameter 63mm, with 3 countersunk screw fixings. |