Designed with Neutrik opticalCON in mind but equally suited to front mounting any Canford Universal or industry standard D series connectors. These 1U 8 way, 12 way and 16 way steel panels incorporate M3 tapped mounting holes and allow for the rapid assembly of populated panels without the need for specialist tooling or fiddly nuts.
Flat panels
Flush mounting panels manufactured with a dual-angled bottom plate extending 100mm behind the panel face, offering rigidity and cable lacing slots. The cable lacing area aligns vertically with the lower edge of fitted connectors allowing clearance for cable ties and avoiding infringement of the rack space below. A designation-strip holder with snap-on cover is fitted, permitting the supplied paper strips to be inserted before or after installation; 7.5mm of printable height is available.
Angled panels
Angled panels have a 30 degree downward angle to facilitate cable stress relief when in use. Also manufactured with a dual-angled bottom plate extending 106mm behind the panel face, offering rigidity and cable lacing slots. The cable lacing area aligns vertically with the lower edge of fitted connectors allowing clearance for cable ties and avoiding infringement of the rack space below. A designation-strip holder with snap-on cover is fitted, permitting the supplied paper strips to be inserted before or after installation; 7.5mm of printable height is available.
All panels come complete with the appropriate quantity of M3 connector mounting screws.
Available as standard in a hard wearing Dawn Grey (BS4800-10A03) or Black powder coat finish. Other colours on request, subject to minimum order quantities.
Templates for printing designation strip labels, available as a DWG file for AutoCAD and compatible applications, can be downloaded from the appropriate product page on the Canford website. Spare 432mm designation-strip paper (not suitable for printers) and covers are available, see CANFORD DESIGNATION STRIPS - Snap-on.
Manufactured by Canford.